Press the (P) button and the Blue LED will blink
Situation 2_Blue and Green LED blinks alternatively when Connecting to Chow by the first user
Entering a wrong password to your Wifi network
Situation 3_Red LED blinks when Connecting to Chow by the first user
The ChowHUB cannot identify the IP from the router. Please disconnect other device.
Situation 4_ Red LED blinks when Enter the PIN code
Entering the wrong PIN code. Please confirm the correct PIN code with the first user.
Situation 6_ Red LED stays ON
Red LED stays ON indicates a system error. Please press the (R) button
Situation 7_Default to factory setting
Default to factory setting will be applied when you lose your PIN code for sharing the device. After defaulting, please follow the previous indications to reconnect the ChowHUB to Wi-Fi network.
- Tap the ChowHUB icon on the main page for 3 seconds and delete the ChowHUB
- Open the ChowHUB, press the (P) button for 5 seconds and release it. The Green LED will blink once.
- Press the (R) button. When the Blue LED blinks, it means the ChowHUB is successfully defaulted.
Situation 8_Change the PIN code
Enter the operation page of the device in Chow -> Tap the (Device information) in the setting page -> Tap (Pin code Setting) to set a new PIN code
Situation 9_Change to another Wi-Fi network
Enter the operation page of the device in Chow -> Tap the (Device information) in the setting page -> Tap the Wi-Fi icon to change to another Wi-Fi network